Fiamma Adapter Kit Roof Rail

Description:

Fiamma F45 & Fiamma Zip Kit Roof Rail

Motorhome awning installation kit suitable for F45 and Fiamma Zip awnings. Suitable for motorhomes with fitted roof rails. A minimum of two pieces required to install an awning.

Fits to overhanging and non-overhanging roof bars.

The bottom of the awning sits 120mm below the top of the roof bar. Check the height of your roof bars above your van roof, and above the top of your sliding door to ensure the awning will not contact the roof or interfere with the opening of the door.

When facing the side of your vehicle and looking at the end of the roof bar, the roof bar must be no more than 58mm wide.

The standard supplied bolts allow fitting to roof bars which measure up to 35mm in height. To fit to larger diameter roof bars you will need to obtain 4 x M6 bolts of length to suit your application.

Specification:

• Pieces: 1 pcs. 12 cm bracket.

Downloads