With a new compact case profile, the F35 awning shows what Fiamma has to offer with their modern and sleek awnings for the 2026 season and beyond. Boasting a push button and spring system to enable easy open and secure closing of the awning case, larger push buttons than on the awning legs than the previous iteration of the awning to make pitching the awning even easier and a progressive rack-based fabric tensioning system, the new F35 awning builds on the solid foundation of the versions that came before and elevates it to new heights in terms of user friendliness and utility.
The Fiamma F35 is a simple to operate awning which can be fitted directly to the straight section of a caravan awning rail, or used with one of an extensive range of fitting kits which make it a cost effective option for many makes and models of campervan, minivan and 4x4.
The F35 awning consists of a large canopy fabric wrapped around an aluminium roller tube. When opened the F35 canopy provides a lightweight sun shade or rain shelter, and when packed it all fits within a neat, compact case fitted to the van roof so there is no need to find storage space inside the van.
The Deep Black case awning is available in lengths from 200 to 320 to suit a wide variety of van sizes and styles. Most awning sizes allow the option of fitting individual front or side panels, and sizes from 260 upward can be equipped with a full room enclosure.
To setp up the awning you simply open the case and unravel the roof fabric which is wrapped around the aluminium roller. Then, pull out and extend the hinged rafters and legs which are housed within the roller tube.
Because the F35 is made using only lightweight materials there is no heavy lifting or particular strength required for set up, and you can erect your van shelter in around 45 seconds.
The Fiamma F35 has a hook profile which runs along the top of the awning case for its full length. This allows the F35 to be hooked in to straight section of awning rail on a caravan, or means a simple awning rail can be fitted for flat wall installation on a van.*
* Installation on caravan rail, or awning rail fitted to a flat wall van, requires drilling and bolting through the 'van wall. For this installation you may prefer Fiamma Caravanstore which does not require drilling of the wall.
For installation on vans and 4x4s, Fiamma there are an extensive range of fittings kits to suit vehicles such as
You can browse our range of Fiamma F35 Fitting Kits to find one to match your vehicle, or email sales@agentfiamma.co.uk for assistance.
Hard Box - Super lightweight anodized aluminium awning case available in Deep Black finish
Legs In - Legs and Rafters are stored inside the roller tube and are hinged and telescopic making them easy to take out and install and impossible to lose.
Roller Tube - Made from lightweight aluminium it is easy to set up, and can be rolled in either direction when packing away
Double guide - The lead bar of the awning has 2 channels allowing it to be equipped with a range of optional panels and accessories
Easy Installation - Simple attachment to straight awning rail, or make use of the range of vehicle specific fitting kits
| Description | Case Length A | Fabric Length B | Awning Extension C | Max height D | Weight |
|---|---|---|---|---|---|
| F35 200 | 193 cm | 162 cm | 180 cm | 195 cm | 9.0 kg |
| F35 230 | 233 cm | 202 cm | 225 cm | 225 cm | 11.0 kg |
| F35 260 | 263 cm | 232 cm | 225 cm | 225 cm | 12.0 kg |
| F35 290 | 285 cm | 254 cm | 250 cm | 225 cm | 13.5 kg |
| F35 320 | 315 cm | 284 cm | 250 cm | 225 cm | 14.5 kg |
Fiamma F35 Pro awnings are delivered with Ground Pegs -- Fixing Bolt-- 2 x Guyline -- Leg Wall Brackets
You can equip your F35 awning with a range of additional accessories including;
